07-30-05   Pressure washed wings and drilled one wing to wiring conduit.

08-04-05    Installed Aileron Bellcranks.

08-11-05    Built all Aileron Pushrods.

08-12-05    Deburred Aileron attach plates and primed.

08-13-05    Riveted Aileron attach plates and installed right Aileron, Pitot Tube mount shown.

08-20-05    Deburred, primed and riveted Aileron Gap Fairings.

08-26-05    Fabbed Pitot/Static Tube mount.

09-03-05    Cut hole in right Wing skin for Pitot Tube.

09-05-05    Visited Aircraft Spruce in Atlanta and riveted right Wing skin on with Jim Andrews.

09-06-05    Matt Berry came by and helped rivet the left Wing skin on.

09-10-05    Dimpled right Wing and Flap brace for Flap hinge. Installed Flap Brace.

09-11-05    Riveted right Wing Flap hinge to Wing.

09-17-05    Installed left Flap and dimple inspection plates.

09-24-05    Fabbed Aileron Stops and installed.

10-08-05    Dimpled Wing Tip skins and drilled tips and added plate nut strips.

10-15-05    Installed foam rib into Wing Tip.

11-13-05    Installed second Wing Tip foam rib and LED Nav Light.

11-20-05    Installed both Wings into the Fuselage.

11-26-05    Drilled the Wing rear spar holes with Teds jig.

11-27-05    Fabbed the Tank support reinforcement and shims.

12-16-05    Installed Wing Farings and right Tank mount.