I marked the location and painted the dash with my Hammered paint and sprayed light dry coats as to create a semi-flat

look and still match the color of the interior.  Installed the Canopy Glass and screwed it on permanently.

Time to fill the gap between the Plexi and frame.

Mixed my Epoxy, beads and flock and put in a Zip-Loc Freezer bag and cut the corner off.

Laid Dacron on top and smoothed slightly with my finger.

A few hours later it had set and I peeled off the Dacron.

I then removed the tape and put another layer about 5/8" above and below the filler and sanded the Plexi and frame skin

with 80 grit.  Removed that tape and added a couple new strips.  Mixed up another batch of filler and applied using the

same method as before.  I then shaped it slightly with a Credit Card. (since I have no credit)

Then laid Dacron over that and smoothed it with the Credit Card.  It looks great!  I don't see lots of sanding and shaping

in my future.  The next layer will have a few layers of glass on top.