I was pretty happy with alignment and fit of my forward section so I drilled my side rails to the forward frame.

I trimmed the front edge back a little more and then cut it in half.  I have made more trim marks on the front and

down the sides and will cut them tomorrow.

Along the blue tape is where I will be trimming it back even more.

This appears a little too far forward and I will move it aft enough to add the rivets to the filet.  Nice thing is you can

locate it pretty much wherever you like.  Trimming the Canopy isn't as hard as some lead on.  It just takes a steady

hand to make nice straight cuts.