Installed fuel system and tank vents.  I am using and Andair FS 20x3 Fuel Selector.  I also turned

mine at a 45 for a better view for me and to position the fittings into each corner of the box.

I found it was easier to bend the fuel tubing to accommodate it.  Unlike the valve Vans supplies,

the outlets exit the valve on their respective sides to the tank.

I also flipped the mounting plate as to accommodate a mount for a GPS.

I also added a stiffener plate to mount the Gascolator.  All my devices will be connected to a common

ground block.  That is why the pump ground is not connected to its mounting bolt.

Added a small stainless screen with ProSeal.