Worked on a few different areas today.  Rick came by to help me remove my Canopy so I could work on a little more

wiring and such under the front skin.

This is the alternate air valve.  I countersunk the topside of the valve for the cable connection screw.

Also countersunk the steel inlet.

Drilled the airbox cover.

Applied a small amount of JB Weld to seal it and then riveted into place.

This is my low-tech manifold pressure adapter. 

Safety wired my dipstick tube since I reinstalled it.

Riveted the Airbox assembly together and have yet to fab and mount the scat tubing flange.